|
Post by ronaldcz on Dec 11, 2021 2:30:41 GMT -6
Has anyone ever had this happen? I typically shoot left-handed but can go right (right-handed but left eye dominant). I recently got a good deal on a RH Hoyt Gamemaster II; 2 sets of Hoyt limbs, 30 & 45#, and lots of other stuff and pretty new/unused condition. The 45# camo limbs are all I've used so far and it's my 1st metal riser bow - so kind of a new style for me. While unstringing I "cut" 2 bow strings, the 1st was iffy on being cut and I did release it on the lower limb (I was backwards in my left-right thinking) and the second was a new string and clearly cut - it wasn't loose enough yet to slide down the limb when relaxed. I checked out the limbs thinking there was a flaw or something and it turned out the edges were actually pretty sharp. I ended up getting some 300 - 600 grit sand paper and rounding out the limb edges. But it seems a bit odd that the limbs had edges sharp enough to cut a string. Has anyone else encountered anything like this? Ronald
|
|
|
Post by Draven on Dec 11, 2021 6:21:52 GMT -6
Sharp to cut the string while unstringing, no. Were you using the stringer? Maybe the loops were too small and the pressure was too much on the sharp edges of the grooves.
|
|
|
Post by ronaldcz on Dec 14, 2021 22:03:55 GMT -6
I do use a stringer and that seemed to be the case, loops were pretty tight.
|
|