|
|
Post by Rick Barbee on Jan 24, 2022 18:07:00 GMT -6
This is my best shelf mod to date. Not real pretty, but it works fantastic. Complete fletching clearance.     |
|
|
|
Post by Rick Barbee on Jan 24, 2022 18:08:25 GMT -6
The shelf is made with two felt furniture pads stuck together, then I used a dremel with a sanding wheel to trim it to the shape I wanted.
|
|
|
|
Post by Rick Barbee on Jan 25, 2022 7:47:02 GMT -6
I don't want to do any more trimming on it, until I know exactly how much I need to have.
Once I get my final tune nailed down (probably after I get my new limbs), I'll trim it a bit more (if I have any excessive width), then purdy it up & make it match with some velcro.
|
|
|
|
Post by Rick Barbee on Jan 25, 2022 16:04:41 GMT -6
What I plan to do is, once this is completely finished the way it needs to be, and how I want it, I am going to copy it in a hard material. I've molded JB Weld with great success in the past, and that is probably what I will use for the hard material.
The one difference with the hard material will be, that it will not have the hump on top. It will instead have a square slot, that I will cut a piece of the felt to drop into that slot, and secure it to create the hump.
|
|
