|
|
Post by Rick Barbee on Aug 9, 2021 12:49:45 GMT -6
New tab design I'm working on. (Bolt Together). This is a: DA3US_SW_B_Large Death Adder/3 Under/Signature/String Walking/Bolt Together/Large. I still have some minor bugs to work out, but once I do I will be offering all of my tab models in a "Bolt Together" model. This makes it where all parts are easily replaceable.
 |
|
|
|
Post by Cameron Root on Aug 9, 2021 13:40:36 GMT -6
Ohhh yaaaah
|
|
|
|
Post by Rick Barbee on Aug 9, 2021 13:45:08 GMT -6
That kydex still looks like leather. I like that.  |
|
|
|
Post by Rick Barbee on Aug 9, 2021 20:09:10 GMT -6
DASF_B_Right_Large: Death Adder Split Finger / Bolt / Right / Large  |
|
|
|
Post by Draven on Aug 9, 2021 20:23:40 GMT -6
Can you make the 3under tab with same profile as split finger - less the cut out?
I favour the straight edge on top when addressing the string - easier to have a repeatable fingers position over and over.
The two tabs are looking great either way.
|
|
|
|
Post by Rick Barbee on Aug 9, 2021 20:57:25 GMT -6
Can you make the 3under tab with same profile as split finger - less the cut out? I favour the straight edge on top when addressing the string - easier to have a repeatable fingers position over and over. The two tabs are looking great either way. Yes Sir, and already have a model like that. It's the one I call the "Traditional" model. You can see all of my tab models at the following link:
Once I get the bugs all worked out of the bolt together models, all the old models will be replaced with the bolt together.
The bolt together models will all be the same as the old models, except they bolt together.
|
|
|
|
Post by TXRebel on Aug 10, 2021 8:20:11 GMT -6
Let us know when the new models are available.
|
|
|
|
Post by Rick Barbee on Aug 10, 2021 17:16:42 GMT -6
I changed that three under tab at the top up some. Didn't like just the laser etching for the string walking increments, so I stitched that top piece for better viewing. Much better. Still all bolt together.  |
|
|
|
Post by Draven on Aug 10, 2021 17:39:03 GMT -6
This one is way easier to read! It looks great
|
|
|
|
Post by flinger1 on Aug 11, 2021 1:04:08 GMT -6
I’m getting ready too switch over to a tab and I’m holding out for the death adder!
|
|
|
|
Post by Cameron Root on Aug 11, 2021 2:31:53 GMT -6
Yes more visible. There all named that Flinger
|
|
|
|
Post by Rick Barbee on Aug 12, 2021 9:35:07 GMT -6
What I am doing is redesigning them, so they are all fastened/bolted together with leather belt fasteners.
The shapes, and sizes of all models will be exactly as they have always been. But with them being fastened together with the leather fasteners, each individual part/piece will be easily replaceable.
The intent of this change is, to keep folks from having to buy a whole new tab if/when they wear out the nylon string face. If/when they do, they can simply buy a new nylon string face, disassemble the tab, and replace the old one with it.
All of the other parts are replaceable as well, but the string face is the primary goal.
|
|
|
|
Post by Rick Barbee on Aug 12, 2021 16:47:29 GMT -6
Two Death Adder 3 Under Signature Mediums. It don't get any more identical than this.  |
|
|
|
Post by flinger1 on Aug 13, 2021 1:49:40 GMT -6
Release them Rick! I’m ready to switch over from a glove and I’ll have plenty of time to adjust before our rut here🤔
|
|
|
|
Post by Cameron Root on Aug 13, 2021 10:12:50 GMT -6
Order it
|
|
